1 / 8 Alloy 625 Downhole Chemical Injection Control Line Tubing ASTM B704
Tiptop is specialized in providing alloy steel coiled tube, alloy steel control line, alloy steel continuous tube.
Seamless control lines are used in SCSSV, Chemical Injection, and Advanced Well Completions. Seamless tubes provide another tubing solution for our customer's complex well designs. The most common uses for Seamless line tend to be shorter length applications whereby no orbital welds are required.
Type 625 Alloy (UNS Designation NO6625) is an austenitic nickel-based super alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions, including jet engine environments and in many other aerospace and chemical process applications. The alloy has outstanding strength and toughness at temperatures ranging from cryogenic temperature to 2000°F (1093°C). Type 625 alloy also has exceptional fatigue resistance. It derives its strength from the solid solution strengthening effects of molybdenum and columbium on the nickel-chromium matrix. Although the alloy was developed for high temperature strength, its highly alloyed composition provides a high level of general corrosion resistance to a wide range of oxidizing and non-oxidizing environments.
Size Chart
| OD |
Wall
(inch) |
Materials |
Standard |
Working Pressure
(MPa) |
Length |
| 1/8" |
0.02,0.028,0.035 |
Austenitic steel 304L (UNS S30403)
Austenitic steel 316L (UNS S31603)
Duplex 2205 (UNS S32205 & S31803)
Super Duplex 2507 (UNS S32750)
Incoloy 825 (UNS N08825)
Inconel 625 (UNS N06625) |
ASTM-A 269
ASTM-A 632
ASTM-A 789
ASTM-B 704
|
60-120 Mpa
|
Customized
|
| 3/16" |
0.02,0.028,0.035,0.049 |
| 1/4" |
0.02,0.028,0.035,0.049,0.065,0.083
|
| 5/16" |
| 3/8" |
| 1/2" |
Chemical Composition
| Chemical Composition,% |
| Standard |
ASTM A269 |
ASTM A789 |
ASTM B704 |
| Material |
SS 304 |
SS 304L |
SS 316 |
SS 316L |
Duplex 2205 |
Super Duplex 2507 |
Incoloy 625 |
Incoloy 825 |
| UNS |
S30400 |
S30403 |
S31600 |
S31603 |
S32205 |
S32750 |
N06625 |
N08825 |
| C |
0.08 |
0.035 |
0.08 |
0.035 |
0.03 |
0.03 |
0.1 |
0.05 |
| Mn |
2 |
2 |
2 |
2 |
2 |
1.2 |
0.5 |
1 |
| P |
0.045 |
0.045 |
0.045 |
0.045 |
0.03 |
0.035 |
0.015 |
... |
| S |
0.03 |
0.03 |
0.03 |
0.03 |
0.02 |
0.02 |
0.015 |
0.03 |
| Si |
1 |
1 |
1 |
1 |
1 |
0.8 |
0.5 |
0.5 |
| Ni |
8.0-11.0 |
8.0-12.0 |
10.0-14.0 |
10.0-15.0 |
4.5-6.5 |
6.0-8.0 |
min 58.0 |
38.0-46.0 |
| Cr |
18.0-20.0 |
18.0-20.0 |
16.0-18.0 |
16.0-18.0 |
22.0-23.0 |
24.0-26.0 |
20.0-23.0 |
19.5-23.5 |
| Mo |
... |
... |
2.00-3.00 |
2.00-3.00 |
3.0-3.5 |
3.0-3.5 |
8.0-10.0 |
2.5-3.5 |
| N |
... |
... |
... |
... |
0.14-0.20 |
0.24-0.32 |
... |
... |
| Cu |
... |
... |
... |
... |
... |
0.5 |
... |
1.5-3.0 |
| Fe |
|
|
|
|
|
|
5 |
min 22.0 |
| Al |
|
|
|
|
|
|
0.4 |
0.2 |
| Ti |
|
|
|
|
|
|
0.4 |
0.6-1.2 |
| Cb+Ta |
|
|
|
|
|
|
3.15-4.15 |
... |
Quality Control:
Hydrostatic test for each coil and conform to ASTM standards and requested specifications. The specification and length per coil can be customized according to customers’ requirements.
With high pressure and super length from 1/8” to 1/2” OD and a variety of wall thicknesses in loose bulk wound coils or reeled on wooden drum. These products are mainly applied in petroleum industry, chemical industry, shipbuilding, natural gas, and etc.
Product Tags:
|
|
1/8 Alloy 625 ASTM B704 Downhole Coiled Tubing Images
|
